DOORSNZ have been supplying quality garage doors in New Zealand for over 10 years.
Proud to be a reseller of the Garador brand of doors who with more than 50 years of garage door manufacturing in New Zealand, know abit about garage doors, and in particular Roller Doors having acquired the original licensing agreement with B&D Australis to launch AHI Garage Doors in NZ.
So whether you are renovating an old garage or building a new commercial premises, Garador’s extensive range of door colours, styles and steel thicknesses will provide the solution you need.
DoorsNZ are bringing you the quality of Garador without the costs associated with dealing with a bricks and mortar store. Our customers know what they what, they know how to measure the opening and they are confident to manage their own installation. Therefore they do not need to pay a premium for the knowledge and expertise that an accredited Garador dealer quite rightly charges more for.
If you do not need the extra service then DoorsNZ provides a platform where you don't have to pay a premium for it
Roll-A-Doors from Garador have these features as standard
Weather Strip
All doors are fitted with a weather strip across the base. The weather resistant strip features deep cushioning to create an effective seal against wind, leaves and rain water. If the floor is slightly uneven, the weather strip reduces the gap for a better fit.
Tension Strip
Garador Roll-A-Doors feature a galvanised steel tension strip to enhance vertical rigidity. This provides true alignment, ensuring that the door does not become stretched. An important feature in the case of large, industrial-sized doors.
Teflon Coated Edge Strip
The Teflon-coated side edge strip reduces friction, ensuring that the roller door opens quietly, evenly and smoothly, with precise movement through the guides.
Gearing System
Fast and easy operation with minimum effort when opening or closing doors over 3.3m high, with our factory aligned reduction gearing system. This system is available as an optional extra on other door heights.
Galvanised Steel Hub
Perfect balance is achieved via a galvanised steel hub with a nylon bearing, ensuring long life with high repetition use. The computerised spring selection provides consistent balance and reliable ease of operation.
Nylofelt Running Strips
Metal-to-metal contact is eliminated by the nylofelt running strips, making for smooth, quiet, friction-free operation.
Series 1 Domestic Roll-A-Door
• Durability and security with ease of operation
• Standard Lock and Key system centrally located on the door
• Nylofelt and Roll-A-Guide for smooth, quiet, greaseless operation and less maintenance
• Available in an extensive range of colours, as well as optional mini-storage colours to identify with your brand
Series 1 Mini Warehouse Roll-A-Door
• Durability and security with ease of operation
• Specifically designed locking system accommodating 2 padlocks
• Nylofelt and Roll-A-Guide for smooth, quiet, greaseless operation and less maintenance
• Available in an extensive range of colours, as well as optional mini-storage colours to identify with your brand
Series 1 Doors also have Optional Wind Locking Guides
Our wind-locking technology incorporates a unique clip design fitted to the edge of every flat on our high wind rolling doors.
When exposed to high wind situations, this clip design ensures the door is held captive in the door track, it reduces the risk of both blow-in and blow-out wind forces, and provides added protection against forced entry.
(Note: due to the wind testing done by Garador most Series 1 roller doors in NZ now require Windlock Guides to meet the new NZS 4505 standards, that does not mean your existing doors are inferior, but the standard of testing have not only changed, but become compulsory for manufacturers who want to offer a high level of confidence in their products performance. DoorsNZ have set their Garador products to select Windlock Guides by default, but also allow the customer to opt out of having these if their site is sheltered and does not require them, or the security of the door is not important to them)
Industrial Roll-A-Door Series 2
• Available in a number of configurations to suit sizes from 2400mm to 5000mm in height and 2400mm to 4900mm door widths
• Sizes up to 5000mm high x 4900mm wide for non-windlocked configurations
• Weather resistant and low maintenance
• Available in 20 colours plus Zincalume®
• Smooth, quiet, easy to operate
• Manufactured to a durable, time-tested design
• Push button operation via our heavy-duty GDO-10 Opener (optional)
Optional Wind Locking Guides
Our wind-locking technology incorporates a unique clip design fitted to the edge of every flat on our high wind rolling doors.
When exposed to high wind situations, this clip design ensures the door is held captive in the door track, it reduces the risk of both blow-in and blow-out wind forces, and provides added protection against forced entry.
(Note: due to the wind testing done by Garador most Series 2 roller doors in NZ now require Windlock Guides to meet the new NZS 4505 standards, that does not mean your existing doors are inferior, but the standard of testing have not only changed, but become compulsory for manufacturers who want to offer a high level of confidence in their products performance. DoorsNZ have set their Garador products to select Windlock Guides by default, but also allow the customer to opt out of having these if their site is sheltered and does not require them, or the security of the door is not important to them)
Semi-Industrial Roll-A-Door Series 3
• Lightweight, easy operation
•Perfect for tight headroom situations or where maximum opening height is important.
• Available in a number of configurations to suit sizes from 2100mm to 3300mm in height and door 2400mm to 4800mm widths.
• Available in 17 colours plus Zincalume®
• Smooth, quiet, easy to operate
• Springs safely concealed
• Manufactured to a durable, time-tested design
• Manual or remote control operation available